Easy Setup via Plug-n-Play USB

• Load / Save Configurations
• Diagnostics with Chart & Log Operations

Integrated Display

• Monitor/edit Setpoints, limits, control mode
• Monitor Line / Load Voltage, Load Current, Load Power, Temperature, Alarms
• Optional Remote Display Kit for panel mounting
• Rated UL Type 1, 12, IP 65

Auto-Ranging Line Voltage

• 24 - 600 VAC, 45 - 65 Hz

Analog Interface

• Two analog set point inputs
• Standard 4 - 20 mA, 0 – 5 Vdc, or POT
• Field scalable within 0 – 10 VDC or 0 – 20 mA

Optional Digital Interfaces:

• Modbus RTU (RS-485)
• Modbus TCP (Ethernet)
• ODVA-certified DeviceNet™
• PROFINET™ (Ethernet)
• EtherNet/IP™

Control Features

• Digital Controller / Phase Lock Loop Timing
• Controls on True Power, RMS or AVG Voltage, RMS or AVG Current
• Zero-Cross / Phase Angle / Burst Mode Firing
• Adjustable Soft Start
• Output Limits: Voltage, Current, Power
• Missing Cycle Detection
• TRANS-GUARD™, SYNC-GUARD™

Alarms

• Overtemp / Shorted SCR / Over Current Trip / Phase Loss
• Early temperature warning through the use of thermistors on every heat sink

Optional Auxiliary I/O Card

• 2 Digital Inputs
• 2 Digital Outputs
• 2 Analog Retransmits (Load Voltage, Load Current, Load Power, other)